|
DO IT ONCE. DO IT RIGHT. When winter gets tough, get even tougher with the FISHER® XV2™ v-plow. Built to power through any storm, the FISHER XV2 v-plow comes equipped with extreme flared wings—up to 45″—and double-acting cylinders to easily handle anything thrown in its path. Plus, it’s qualified for vehicles up to Class 6, so it’s as versatile as it is hardworking. |
PLOW BLADE CONSTRUCTION
The XV2 v-plow features extreme flared wings that soar from a 35″ center height up to 45″ at the outer edge on 10′ 6″ models. The XV2 v-plow is available in premium, corrosion-resistant stainless steel and powder coated steel in 8′ 6″, 9′ 6″ and 10′ 6″ widths. The blade comes standard with a 6″, high carbon steel cutting edge, providing increased wear resistance and a clean scrape. An aggressive, 70-degree attack angle enhances scraping and back dragging, making it ideal for asphalt and paved surfaces, and for scraping up ice and hard-packed snow. 10’6″ model has thicker moldboards and a more robust base angle with additional hinge points. |
STRUCTURAL REINFORCEMENT
The XV2 v-plow features our exclusive x-bracing design which is constructed from four vertical ribs and eight x-bracing ribs. Both the ribs and the boxed steel tube reinforce the blade for structural integrity and exceptional torsional strength. A 1 ¼”-diameter, heat-treated steel center pin resides within a three-connection-point hinge for added strength and rigidity. The 10’6″ model has a heavy-duty T-Frame that features solid, one-piece construction from front to back and an oscillating pivot bar. *9′ 6″ model shown |
DOUBLE-ACTING CYLINDERS
InstaLock double-acting cylinders allow the operator to lock the wings together to use the v-plow in straight blade mode with single button control. Double-acting cylinders also hold the wings firmly in place for clean, efficient back dragging. |
FLARED WINGS
Reduce the amount of snow that rolls off the top of the plow with standard flared wings that rise 6″-10″ from the center pin. The flared-wing design can aggressively cast snow further while windrowing, making it the ultimate windrowing machine. |
TRACTOR COMPATIBLE MOUNT
Designed for easy installation onto a wide range of tractor models, these mount kits make it possible for the XV2 v-plows to fit on a compact tractor. They are flared both vertically and horizontally to ensure proper alignment and make the drive-in connection easier. The push beam, which makes up the front portion of the mount, can be quickly detached to allow for a loader attachment. |
BLADE ANGLE STOPS (STANDARD FOR 10'6" MODEL)
The 10′ 6″ model comes standard with blade angle stops, made of reinforced 3/16″ high-strength steel tube. The blade stops reduce stress and wear on the blade. |
CURB GUARDS (STANDARD FOR 10'6" MODEL)
The 10’6″ model has standard curb guards, constructed of abrasion-resistant material and designed to fit tight to the blade. The curb guards protect the outer edge of the plow from wear when plowing along sidewalks and curbs. |
CENTER SNOW CONTROL
For exceptional snow containment in all positions, the XV2™ v-plow has a center deflector designed to prevent snow from going over the top of the blade and the formed cutting edges reduce trailing snow. |
|
|
MINUTE MOUNT® 2 SNOW PLOW MOUNTING SYSTEM
The FISHER Minute Mount® 2 system has been engineered for superior safety, durability, and convenience. The mechanical nature of its design means that there are no sensitive electronics that could fail and prevent you from attaching or removing your plow. |
TRIP-EDGE PROTECTION
Each v-plow blade features independent trip-edge protection to get over bumps and hidden obstacles, whether in V, scoop, or straight-blade configuration, helping to protect the plow, the truck and the operator. Since only the bottom edge trips, snow stays in front of the blade, so you can keep on going without dumping the entire load of snow. The FISHER® trip-edge uses compression-type springs that never require adjustment and will not wear out like extension springs. |
RELIABLE HYDRAULICS
We design and manufacture our own hydraulics to ensure the highest standards of performance, quality, and durability—giving you a plow that is fast, responsive, and built to last. This allows plow drivers to change the blade position quickly and easily for efficient plowing. All critical hydraulic components are fully enclosed for protection from the elements. |
CHAIN LIFT DESIGN
The FISHER® chain lift design offers a wide range of performance and reliability advantages over a direct lift system. |
FLEET FLEX ELECTRICAL SYSTEM
The FLEET FLEX Electrical System minimizes intrusion to your vehicle during installation and also provide simple, reliable connections between your vehicle and plow. It's completely universal to all current FISHER snowplows so that plow fleets are able to optimize their operations and use any plow on any vehicle for true fleet interchangeability. |
SECURITY GUARD™ ANTI-THEFT SYSTEM
The exclusive SECURITY GUARD anti-theft system is a safe and secure way to electronically lock your snow plow whenever it is detached from your truck. |
STORM GUARD™ BAKED-ON POWDER COAT
The industry’s best protection against wear and rust, the STORM GUARD™ baked-on powder coat with epoxy primer is standard on all FISHER® snow plows. |
UNIVERSAL PLOW CONTROL OPTIONS
Choose between the ergonomic Fish-Stik® hand-held control or the dash-mounted joystick control. Both feature automatic shutoff, backlit buttons for night operation, and LED lights which indicate "power" and "float" mode. Additional features include programmable "soft-stop", "one-touch" float, build in SECURITY GUARD™ anti-theft system and a plug-in connector for easy removal. Both controls have a plug-in connector for easy removal. |
ISOLATION MODULE
An underhood module transfers lights from vehicle to plow automatically and improves system reliability by using plug 'n play, sealed electrical connections that comply with OEM requirements. Isolating the plow's electrical system from the vehicle's prevents the potential of electrical system damage in the event of a shorted circuit. |
PRE-PUNCHED BLADES FOR ACCESSORIES
The blade is pre-punched for easy installation of accessories, providing a custom fit. The pre-punched holes also prevent damage to the powder coat that can sometimes occur when installing an accessory. |
| Name | Link |
| FULL-LINE BROCHURES | Download |
Monday - Friday:
8:00AM - 5:00PM
Saturday:
Closed
Sunday:
Closed
Monday - Thursday: 8:00AM - 5:00PM
Friday: 8:00AM - 5:00PM
Saturday: Closed
Sunday: Closed
INTENSIFIRE™ SNOW PLOW HEADLIGHTS
