The Reflex tine is benefitting of a high vibration effect: the large coil and the high tine clearance of 725mm (28“) gives a high flexibility while ensuring a high vibration to crack the clods. Three different shares are available.
The working depth of the share stays regular even when the tine release to the back thanks to the tine design.
The narrow tine spacing is made for an active crumbling and nice levelling. In addition, the pressure applied on the coil is reduced to extend the life time.

The frame is a result of a long study made by FEM (Finite Element Method) calculation to optimise the steel over the working width and proposing a strong structure able to resist to tractors up to 450hp (336kW).

The rear depth control of the Kubota CU1000T is adjusted via the roller equipment. The parallelogram frame concept enables the working depth to be easily adjusted. The levelling tine sections are simultaneously adjusted with the roller, if necessary fine tuning of the levelling tines can also be achieved. The adjustment is centralized by crank.
 
Therefore all adjustments are simple and user-friendly.