ID # 21544462

Fisher - XV2™ V-PLOW

Call for Price

Fisher XV2™ V PLOW Tougher Than Winter

When winter gets tough, get even tougher with the FISHER® XV2™ v-plow. Built to power through any storm, the FISHER XV2 v-plow comes equipped with extreme flared wings—up to 45″—and double-acting cylinders to easily handle anything thrown in its path. Plus, it’s qualified for vehicles up to Class 6, so it’s as versatile as it is hardworking.

10' 6" PC or SS
Sale Type
10' 6" PC or SS
Mount Type
Minute Mount® 2
Blade Gauge
11 PC / 12 SS
Blade Width
10' 6"
Angling Rams
2" x 11"
Blade Height
35" at Center / 45" at End
Cutting Edge
½" x 6"
Trip Springs
Lift Cylinder
1 ¾" x 10"
Plowing Width
9' 9" Full Angle / 9' 7" Scoop / 9' 11" Full V
Approx. Weight
1,222 lb
unique features

Fisher XV2™ V PLOW Structural Reinforcement

The XV2 v-plow features our exclusive x-bracing design which is constructed from four vertical ribs and eight x-bracing ribs. Both the ribs and the boxed steel tube reinforce the blade for structural integrity and exceptional torsional strength.

A 1 ¼"-diameter, heat-treated steel center pin resides within a three-connection-point hinge for added strength and rigidity.

*9' 6" model shown

Reliable Hydraulics

We design and manufacture our own hydraulics to ensure the highest standards of performance, quality, and durability—giving you a plow that is fast, responsive, and built to last. This allows plow drivers to change the blade position quickly and easily for efficient plowing.

All critical hydraulic components are fully enclosed for protection from the elements.

Trip Protection

Each v-plow blade features independent trip-edge protection to get over bumps and hidden obstacles, whether in V, scoop, or straight-blade configuration, helping to protect the plow, the truck and the operator. Since only the bottom edge trips, snow stays in front of the blade, so you can keep on going without dumping the entire load of snow.

The FISHER® trip edge uses compression-type springs that never require adjustment and will not wear out like extension springs.

Fisher XV2™ V PLOW Double-Acting Cylinders

InstaLock double-acting cylinders allow the operator to lock the wings together to use the v-plow in straight blade mode with single button control. Double-acting cylinders also hold the wings firmly in place for clean, efficient back dragging.

Fisher XV2™ V PLOW Center Snow Control

For exceptional snow containment in all positions, the XV2™ v-plow has a center deflector designed to prevent snow from going over the top of the blade and the formed cutting edges reduce trailing snow.

Fisher XV2™ V PLOW 10' 6" Heavy-Duty Features

The 10' 6" XV2 v-plow model comes standard with specific heavy-duty features.

Blade Construction: Thicker moldboards and a more robust base angle with additional hinge points.

Heavy-Duty T-Frame: Features solid, one-piece construction from front to back and an oscillating pivot bar.

Standard Blade Angle Stops: Made of reinforced 3/16" high-strength steel tube, the blade stops reduce stress and wear on the blade.

Standard Curb Guards: Constructed of abrasion-resistant material and designed to fit tight to the blade, the curb guards protect the outer edge of the plow from wear when plowing along sidewalks and curbs.

Fisher XV2™ V PLOW Tractor Compatible Mount

Designed for easy installation onto a wide range of tractor models, these mount kits make it possible for the XV2 v-plows to fit on a compact tractor. They are flared both vertically and horizontally to ensure proper alignment and make the drive-in connection easier. The push beam, which makes up the front portion of the mount, can be quickly detached to allow for a loader attachment.

Videos Documents